How Do I Handle "0x0000007b" Error?

If you have registry entry entries as well as the mass storage controller drivers aren't correctly installed in Windows XP, if they are not properly installed into Windows XP system, you might receive this message when beginning on your Microsoft Windows XP backup computer. But, if you are using the same hardware as your backup computer, this issue is easily fixed. www.office.com/setup

Indications

If you transfer the Microsoft Windows XP boot disk into your backup system and you might encounter an error message that reads "Stop" when trying to start the backup computer. Windows XP based backup computer.

STOP: 0x0000007B (0xF741B84C,0xC0000034,0x00000000,0x00000000)

INACCESSIBLE_BOOT_DEVICE

Reason

The problem usually happens when the hardware mass storage controller drivers and registry entries in the backup computer aren't properly installed on your Windows XP system. There are various types of chip sets for Integrated Device Electronics (IDE) controllers. There are a few of them, including VIA, Promise and Intel. Each of these sets is identified by a unique Plug-nPlay identifier. The PnP-ID data for those controllers needs to be put into the registry prior to the start-up. This is essential to ensure that the correct drivers are installed by Windows XP.

Solving the issue

To resolve the issue You should utilize the same hardware you use the backup system.

  • Simply replace the damaged hardware components of your backup computer using more reliable, non-affected components from the same manufacturer, model and model as the motherboard computer is the primary backup.
  • If your system disk is a different SCSI disk, you can use the same manufacturer and model of the SCRI controller to the new system.
  • Also, if it's an IDE disk, then you can utilize the same motherboard in your new computer that uses the identical collection of IDE chips. Additionally, you can try using the same PnP-ID on the computer to connect to the motherboard for the computer you're backing up.

If you are using SCSI systems disks it is recommended to first prepare the registry. Only check that the drivers you looking for are present after the installation of the SCSI controller, which was installed by the backup computer prior to the transfer of disk's contents. Windows XP PnP aids you to identify the controller, establishing the registry entries that are crucial and then copying the correct driver. After you have the SCSI controller is detected in the Device Manager, you should remove the other controller. If you wish to move all of the system drive to another system that has the exact models and manufacturing of the SCSI controller and the Windows XP system will start smoothly since the system has used the controller previously and therefore will have the proper configuration information.

This method, however, isn't implemented by Microsoft therefore you are able to transfer or join and copy necessary registry entries before. This will enable you support all IDE controllers that are compatible with the Windows XP system. This will offer the necessary support for the IDE controllers that have a PnP-ID that matches the PnP-ID listed in the following list. Search %SystemRoot%\Setupapi.log file for the already detected PnP-ID while the Setup program is currently running, if you wish to beforehand determine the IDE controllers which are used in the backup and the current computers.

In order to transfer the data to your computer, follow these steps on two test computers that have the Stop error 0x0000007B. Following the process to move the hard disks, and restart your computer after you have resolved these problems.

  • Now extract the Atapi.sys, Pciide.sys, Pciidex.sys and the Intelide.sys files out from %SystemRoot%\Driver Cache\I386\Driver.cab file.OR Copy these files into %SystemRoot%\System32\Drivers folder.
  • Within Microsoft Windows Explorer, find Mergeide.reg file on the drive. Right click on it.Then click Merge.

This message is displayed to Windows XP:

Are you sure that you wish to add the information from A:\Mergeide.reg in the Registry?

Click Yes.

After the import process has successfully performed, Windows XP will display yet another message:

Information taken from A:\Mergeide.reg was successfully registered in the registry.

Then, simply close Windows XP and then turn off your computer. Transfer this system disk onto a test PC that had previously displayed the Stop Error 0x0000007B. office.com/myaccount

Popular posts from this blog

Office 2019 vs. Office 365: Which Should You Buy?

Image
 Hаvе уоu еvеr wоndеrеd whаt іѕ thе difference bеtwееn Offісе 365 аnd Office 2019? Aren’t thеу juѕt thе lаtеѕt version оf thе MS Office аррѕ уоu uѕе еvеrу day? Fоr mаnу uѕеrѕ, thіѕ саn bе vеrу confusing – іn thіѕ blog, уоu wіll lеаrn thе dіffеrеnсе bеtwееn thе twо www.office.com/setup аnd understand whаt ѕuіtѕ уоu аnd/оr уоur оrgаnіzаtіоn bеѕt.   Whаt іѕ Microsoft Office 365?   Microsoft Office 365 іѕ a subscription-based ѕеrvісе thаt рrоvіdеѕ Offісе аррlісаtіоnѕ аnd cloud-based ѕеrvісеѕ monthly оr annual. Thеrе аrе mаnу dіffеrеnt subscription рlаnѕ – fоr hоmе uѕеrѕ, ѕmаll аnd mеdіum businesses, lаrgе соmраnіеѕ, ѕсhооlѕ, and nоn-рrоfіt organizations. Sоmе оf thеѕе рlаnѕ include trаdіtіоnаl MS Offісе аррlісаtіоnѕ (ѕuсh аѕ Outlооk, Word, Exсеl, PowerPoint, еtс.) thаt уоu install оn уоur system – оthеrѕ dо nоt! Whаt іѕ іmроrtаnt tо note іѕ thаt Microsoft Office 365 оffеrѕ wеb-bаѕеd ассеѕѕ tо trаdіtіоnаl MS Offісе applications (ѕuсh аѕ Outlооk, Wоrd, Exсеl, PоwеrPоіnt, еtс.)...
Read more

Learning to work with formulas in Word:

Image
Text editor Microsoft Word 2010 is an integral part of the MS Office package. It has wide functionality not only for designing and editing documents, but also for working with additional options, such as inserting and creating mathematical expressions and formulas. These features are relevant both when typing technical texts and when using any other type of documentation. We will talk about how to insert a formula in Word in this article. office.com/myaccount How to find the formula editor? The block for working with equations and formulas is located in the top menu bar in the “Insert” tab, “Symbols” subsection. We place the cursor at the place where the formula is inserted in the document and left-click on the “Equation” item. As a result of selecting the desired option, we will see the display on the page of the area for the new record and the main menu with the constructor of the formula editor in Word. The latter includes built-in blocks for working with equations, transformations,...
Read more

How do I find my WIFI signal strength on Windows 10? – www.office.com/setup

Image
 Do you know an exact location in your home where you can get the maximum WiFi signal strength? So now you can tell about the actual number of full bars in the Wi-Fi icon in the system tray. But it strength not be the best way for you. However, the solid bar gives you an abstract idea of ​​what the signal strength is, but you never get an exact number of values. Therefore, the exact value will surely help you in your analysis process and also give you the real result that can only be used to improve the WiFi signal strength in your office or home or any other place where you can get the maximum wi-fi Need to maintain fi signal strength. Fi signal strength. www.office.com/setup   Steps to check the WiFi signal strength command line path The easiest way to do this is to enter the commands in a CMD window. The command line replay method does not require a software installation process. However, it is a very easy and quick method for any user. If you use this method to confirm tha...
Read more